To get access to modem 3/4G, you’ll need a device with a web browser.
Connect the power to the router and connect your device to this modem. There are two ways to achieve that, first option is using an ethernet cable and connecting directly to your device. The second option is to use the WI-FI network. To connect to the WI-FI network, the details of this network are the following:
SSID: INESO GATEWAY
Mot de passe: ja27fa14-lh44
NOTE: Booting time of the modem can take from 3 up to 5 min. You will have to wait
Once you are on the same network, go to your web browser and enter the following address:
NOTE: The connection is established through HTTP, not HTTPS
The login page should appear. Enter login and password:
Login: admin
Password : Ja27fa14-lh44
Then, after logging in, in the middle, you can find a table called "Modem" with a small characteristic icon next to it. Click on that icon (“I”)
If the table looks different than you can see in the picture below, it means there is information "Connected" or the field "State" has information other than "searching" probably, no action is required to change the PIN code.
After opening the page in “SIM CARD SETTINGS”, we should easily find the field with the name "PIN", in which we should enter our PIN code (Fig.3).
After entering the PIN, go to the bottom of the page and click “Save & Apply”.
After saving, we can check if the model connects correctly to the network, for this, on the main page in the “Modem” table in the field "Data connection" we should notice Connected. Mind that the module can restart at this step, so again few minutes of abiding can be required. During this time fields with “DATA CONNECTION” and “STATE” can change a few times.
If you were connected via Wi-Fi, be sure to disconnect from the network to a safe data plan.
NOTE: Even if your SIM card does not have a PIN number leave this field empty, some operators set “0000” as a default PIN code in this situation 0000 needs to be provided in the PIN field.
